Designed specifically for SMB server rooms, the AutoView® 2000 KVM switch uses CAT 5 cabling and provides an advanced graphical on-screen display.

The AutoView 2000 switch is a 16-port, dual-user appliance designed to meet the challenges faced by growing SMB server rooms. With end-to-end CAT 5 cables, the AutoView 2000 switch eliminates the need for bulky cabling. CAT 5 cabling also allows 100 feet of distance between the server and the switch.

The AutoView 2000 KVM switch provides PS/2, USB, Sun and serial connectivity, and features the OSCAR® graphical user interface (GUI), an advanced multilingual on-screen display.

Autoview 2000 KVM Switch Quick Facts
	16-port, dual user KVM switch Designed specifically for SMB server rooms Advanced graphical on-screen display Uses standard CAT 5 cables

Features and Benefits

Feature	Benefit
User
Access	The AutoView® 2000 switch provides two local users with access to 16 PCs and network devices.
Easy to use OSCAR® graphical user interface,	No training required for immediate user interaction with target computers. Menus available in English, Spanish, French, German and Italian.
Extended distance from switch to target server	CAT 5 cabling solution provides 100-foot distance between the server and the switch.
Share mode	Two users can share access to a primary computer. One user will have control of the target until it stays idle for a configurable amount of time, then either user can take control of the target.
Dual-user cascading	Lets two local users simultaneously access target devices on AutoView switches that are cascaded below a primary KVM switch.
Flexibility
Integrated access cables	You get PS/2 or USB keyboard, video and mouse connectivity in one, slim CAT 5 cable, which reduces cable bulk and cost.
Server interface modules	Smart chip interface automatically assigns and retains unique server names for each attached server. Smart cabling simplifies installation efforts and eases re-configurations tasks. Server interface modules also support PS/2, USB and Sun server platforms and VT100 serial-based devices.
Management
Sun keyboard localisation	Set the Avocent AVRIQ server interface module to the specific country code that supports your Sun workstation.
Flash upgrades	Fast and easy flash upgrades to firmware for appliances and server interface modules

Specifications

Mechanical
Height	1.75 in. (4.45 cm)
Width	17.00 in. (43.18 cm)
Depth	11.00 in. (27.94 cm)
Weight	8 lb. ( 3.6 kg) without cables
Environmental
Operating Temp	50 to 122 F (10 to 50 C)
Storage Temp	-4 to 140 F (-20 to 60 C)
Power
Operating Voltage	100 to 240 VAC Autosensing
Power Frequency	50/60 HZ
Input	40 W maximum
Supported Hardware
Computers	IBM PC/AT, PC and 100% compatibles
Monitors	XGA, XGA-II with adapter, 1600 x 1280 @ 75 Hz resolution
Peripherals	PC keyboard, PC mouse, Microsoft® Explorer mouse, Microsoft IntelliMouse family, IBM Scrollpoint, Logitech Mouseman Wheel, Logitech Trackman Marble Wheel, Logitech Marble FX and Kensington 4-button mouse, Microsoft PS/2 tilt wheel mouse
Standards
Approved Agency	UL FCC Class A, cUL, ICES Class A, CE, N, GS, IRAM, GOST, VCCI, Class A, MIC Class A, C-Tick

Diagram

Photos

Click images below to view larger photo...

Modules and Cables
AVRIQ-PS2	AVRIQ-SRL	AVRIQ-USB
AVRIQ-VSN	PS2IAC-X	USBIAC-X

FAQs

Questions	Answers
Equipment
Do the rack mount brackets come with the AutoView appliances?	Yes. Rack mount brackets are included with the AutoView® 1400, 1500 and 2000 KVM switches.
Cabling
What type of Ethernet cable should be used with AVRIQ modules?	Any CAT 5, 5e or 6 cable that is built as a straight through cable.
Can the integrated access cable store computer names?	Yes.
Can the integrated access cable be upgraded?	No. The IAC firmware is not upgradeable.
Do the integrated access cables support Sun or serial?	No. They are PS2 and USB only. Use the AVRIQ modules for Sun and serial connectivity.